Introducing the BarzTech Carbon Fibre replacement brake & clutch levers for Brembo products.

If you already have any of the Brembo brake and clutch product range, these levers directly replace the heavier originals with a lighter and more luxurious carbon fibre version.

* PLEASE NOTE EACH LEVER IS SOLD AS A SINGLE UNIT, NOT AS A PAIR. IF YOU NEED A PAIR ADD 2 OF THE CORRECT MODEL LEVER TO YOUR CART*

CHOOSING THE CORRECT LEVER:

On the listing above pick the option that matches the Brembo product you have  

• The Corsa Corta & Corsa Corta RR master cylinder has a newer shape lever insert so this model lever is unique.
• The normal rcs range and clutch products (not Corsa Corta) have a more open design which means the shape of lever for this model is different and will not fit Corsa Corta or newer.

If you have any questions regarding fitment email or use the chatbot on the website and I will help you out.

FITS FOLLOWING BREMBO PRODUCTS:

• Brembo rcs19 brake master cylinder
• Brembo rcs19 Corsa Corta brake master cylinder
• Brembo HPK clutch perch
• Brembo rcs clutch lever

The carbon levers not only add a luxury element to your bike but also has a milled cutout to reduce the force of wind pressing on your lever at high speed and also to reduce even more weight.

Designed to be strong but also very lightweight weighing less then 25g compared to the 60g original Brembo levers.

Produced from 100% 2k twill weave carbon fibre with gloss finish.

WHAT’S IN THE BOX:

• 1 Carbon Fibre lever that can be used for the clutch or brake side
• 1 metal shim to be used on the brake lever side

INSTALLATION GUIDE:

1. Using a T30 bit remove the bolt that holds the lever in place.
2. Remove the original Brembo lever with the metal shim.
3. Replace the metal shim with the new one provided along with the new lever
4. Re-insert the bolt that was previously removed.
5. Start to tighten the bolt just until the lever can barely be moved up or down. 
6. Adjust the lever to your desired position. 
7. Now hand tighten the bolt making sure the lever is not loose and firmly in place.

DISCLAIMER:

• BarzTech is not responsible for incorrectly installed brake levers resulting in accidents.
• Ensure to check lever for any damage from time to time, if any damage is sustained causing the carbon weave to crack or show signs of damage the lever should be replaced to avoid the part failing or reduced braking pressure  

STOCK:

If the item is out of stock and you place an order, you will automatically be added to the waiting list. Once the item is restocked your order will automatically be fulfilled and shipped.